Description
4kw/5kw/7.5kw/11kw/15kw/22kw 3Phase 380v to 420v
Solar Pump Inverter
GD100-PV series solar vfd drives are that INVT newly launches specially for solar pumping applications. Based on the original solar pump vfd products, which optimizes the usability and performance, and extends applicable voltage levels and power range of the product. The voltage level can be applied to single phase/three phase 220V, three phase 380V pumps, power range from 4kw to 22kw
More Products
Buy via WhatsApp
Buy via WhatsApp
Buy via WhatsApp
Buy via WhatsApp
Buy via WhatsApp
Buy via WhatsApp
UPS Inverter 1100VA 12v
Description
- ATC ( Automatic temperature compensation ) with temperature sensor help in adjusting battery charging according to climate temperature change
- Powerful Charging even during very low Voltage
- Load startup 300% of rated capacity
- Six Stage battery charging technology help in increasing battery life
- DSP sine wave output with instant switch over to run all the appliances
- System overload alarm in case of excess load and short circuit protection
- Compatible charger with all types of battery (SMF/Flooded Lead Acid / Tubular)
- Graphic display for Main ON, INV. ON, Trip /Over Temperature and low Battery Trip
- Fuzzy logic control based battery charger technology for longer battery life, reduction in water topping and huge savings on electricity bills
Lithium Battery MUST 51.2V 200AH 25.6v/51.2v -100/200ah (2.56kwh/5.12kwh/10.24kwh
LP1600 Wall- Vertical mounted (25.6/51.2V-100/200)
LiFePO4 Battery 2560Wh 5120Wh 10240Wh
The LP1600 Series offers a versatile and reliable power solution. Combine up to 15 units for energy capacities ranging from 2560Wh to 10240Wh. With Wi Fi Remote Monitoring, stay connected and in control. Whether its wall mounted convenience, stacked-mounting (up to 5 units) for space efficiency, or rack-mounted for industrial power management, this series offers seamless adaptability.
Mc4 Branch Connector 4in1
Voltage : 1000VDC
Type : 4 IN 1 OUT
Temperature Range : 120 DegreeC
Connection Cable Cross Section Area :4 IN 1
Locking System Plug Connectors : Connect
Cable cross section :Polycab
Color :Black
Mc4 Branch Connector MC4
Solar Connector,Waterproof Ip67
Features:
- All connectors made with double fixed connection for easy, fast installation and good universality;
- Reliable performance in bad outdoor condition as it’s ageing resistance and anti-ultraviolet features;
- With IP67 waterproof rating to ensure connectors’s proper functioning in the outdoor environment;
- Compatible with MC4 type connectors
5.2 KW 48V Hybrid Inverter
High Frequency Solar Inverter:
PV1800 PRO Series (5.2KW)
PV18-5248-PRO is a multi-function inverter/charger, combining functions of inverter, MPPT 80A solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Features:
■ Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
■ built in MPPT 80A solar charge controller
■ With BMS lithium battery communication function
■ With AC/PV lithium battery activation function
■ combining solar system, AC utility, and battery power source to supply continuous power
■ Overload, short circuit and Deep discharge protection
■ Cold start function
■ Support USB, RS485, CAN monitoring function
■ WIFI remote monitoring (optional)
■ Compatible to generator
1kw12v Hybrid Inverter
High Frequency Solar Inverter:
PV1800 VPM Series PV18-1012- is a multi-function inverter/charger, combining functions of inverter, MPPT 60A solar charger and battery charger to offer uninterruptible power support in portable size. The Maximum PV array open circuit voltage can reach 105V DC and MPPT voltage is 15~75VDC Maximum PV Array Power 700W
Can help customers make full use of solar energy.
Related Products
- Powerful Charging even during very low Voltage
- Load startup 300% of rated capacity
- Six Stage battery charging technology help in increasing battery life
- Pure sine wave output with instant switch over to run all the appliances
- System overload alarm in case of excess load and short circuit protection
- Compatible charger with all types of battery SMF/Flooded Lead Acid / Tubular)
- Graphical display for Mains ON, INV. ON, Charging/Charged
- Overload/Short Circuit Trip/Over Temperature and Low Battery Trip
- Fuzzy logic control based battery charged technology for longer battery life, reduction in water topping and savings on electricity bills
1.6KW-6.2KW ECO Series Hybrid Inverter
PV1800 ECO Series (1.6-6.2KW)
High Frequency off Grid Solar Inverter 1.6~6.2KW | PV 400/450/500V | Dual output | DC 12V, 24V, 48V
PV1800 ECO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 ECO Series can run without battery.
The Maximum PV input voltage can reach 400V/450V/500V, which can help customers make full use of solar energy.
Category: Off Grid Solar Inverter
Tags: Dual output inverter, High Frequency Inverter
Features:
■ Pure sine wave output
■ Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
■ Built-in MPPT solar charge controller
■ Wide PV input voltage range
■ Can provide the power to the load without battery
■ Combining solar system, AC utility, and battery power source to supply continuous power
■ Overload, short circuit and Deep discharge protection
■ Cold start function
■ Support RS485,CAN monitoring function
■ Dual outputs for smart load management
■ Can communicate with lithium batteries (CAN port)
5.2 KW 48V Hybrid Inverter
High Frequency Solar Inverter:
PV1800 PRO Series (5.2KW)
PV18-5248-PRO is a multi-function inverter/charger, combining functions of inverter, MPPT 80A solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Features:
■ Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
■ built in MPPT 80A solar charge controller
■ With BMS lithium battery communication function
■ With AC/PV lithium battery activation function
■ combining solar system, AC utility, and battery power source to supply continuous power
■ Overload, short circuit and Deep discharge protection
■ Cold start function
■ Support USB, RS485, CAN monitoring function
■ WIFI remote monitoring (optional)
■ Compatible to generator
Lithium Battery BCT
48V 300Ah LiFePO4 Lithium Battery: The Ultimate Home Energy Solution! With a Mighty 15kW Power Output and Smart BMS, it Powers Your Home with Reliability and Efficiency.
Solar Charge Controller – PWM
The RG-CE Series offers a versatile range of PWM solar charge controllers, available in 10A, 20A, 30A, 40A, 50A, and 60A models, designed for 12V/24V systems. Engineered to be the backbone of photovoltaic power systems, these controllers ensure efficient battery charging, load management, and long-term system performance. With a commitment to quality, reliability, and environmental sustainability, the RG-CE Series is ideal for diverse applications, from residential and commercial setups to off-grid installations.
Inverter 3.5 KW(24v)
High Frequency Solar Inverter:
PV1800 PRO Series (3.5KW)
PV18-3524-PRO is a multi-function inverter/charger, combining functions of inverter, MPPT 100A solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Features:
■ Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
■ built in MPPT 100A solar charge controller
■ With BMS lithium battery communication function
■ With AC/PV lithium battery activation function
■ combining solar system, AC utility, and battery power source to supply continuous power
■ Overload, short circuit and Deep discharge protection
■ Cold start function
■ Support USB, RS485, CAN monitoring function
■ WIFI remote monitoring (optional)
■ Compatible to generator
Reviews
There are no reviews yet.